Jump to content

Presto pot stirrers


Tournament Strong
  • $85 http://www.tackleunderground.com/community/uploads/monthly_2021_03/329569034_prestostirrervideo_html.c9771f1fbf020edeba857f83822181d5,monthly_2021_03/948414620_Prestopic.jpg.27b60e1e6bf6b31e29b0fa7bbb76a5ba.jpg
I am going to help the maker by doing some machining and handle the sales. He makes 2 models. I have used both models for the past 3 years with no issues. If you use a lot of regrind wait for the bigger motor if your mixing virgin the little one works great. My One with a high torque smaller motor and another with a little larger motor. They are high quality made with expensive components. Super simple to use and comes with a variable control that turns off (most don't you have to un-plug). $85 includes tax and shipping. We are wrapping up 15 units today and I know 5 are spoken for. You can email me at ipsenconnect@mail.com I will invoice you using paypal.

User Feedback

Recommended Comments

I haven't run one everyday. but I don't see why it wouldn't keep running. I have a couple that I have used for the past 2 1/2 years and the only thing I did was replace the controller because the original didn't shut off I would have to unplug it to stop it to fill the injector(s). If you are in a well ventilated area the motor will never get hot and that is what usually kills them. The maker and I found material that doesn't allow heat transfer from the pot to the motor plate so the motor stays room temperature. If you pour or shoot outside take into effect the sun light heating the motor. These stirrers allow you to keep a lower temperature and reduces scorching (depending on plastic). If you depend on regrinds a lot this might not be the stirrer for you. If you start out with virgin and add a little regrinds at a time this is what it was made for. We are making an affordable stirrer for the hobbiest not the full-on production crew. We will probably not make these again because of the costs and labor involved. Spend $60 to make $20 not including the cost of labor. Some of the materials are very hard to get right now (told production was stopped due to Covid and will go back into production later this year). We have found that enclosing or trying to insulate the motor just kept in the heat resulting in failure. If you are interested we are taking orders and as soon as they are ready we will notify you by email and invoice you on paypal. Thanks Randy!  Once they are finished what ever is not preordered with go up on ebay for $95.00. COST: With shipping to the lower 48 $85.00 ipsenconnect@mail.com  

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top