Jigs

Features like 4/0 Owner Cutting Point Hook, 54 strand skirt, powder Paint, Great Vibration make this perfectly balanced for Bottom Dragging or Swimming over Structure. Item shown 3/4 oz. Crawler (Natural Craw)

jigs are hand poured and painted with powder paint. the colors are monkey puke (left) burple (to) and firebug (right) the colors are results from experimenting with multiple coats of paint what do ya think?

1 oz poison tail jig. 5/0 mustad ultra point hook, double red rattles, living rubber and natural scales, 144 strands.

6.5oz megabait-style jigs, cast from wheelweight alloy in a home-made mold. Made with a custom one-piece eyelet wire-form made from 0.065" or 0.076" stainless wire-- extra heavy duty to stand up to a lot of reef-pounding abuse. The jigs are foiled, and then painted. The paint has a pearlescent micro-glitter applied, but its quite difficult to capture in a photo. Eyes are home-made 3-D ultra glow. Clearcoat with Devcon, but the jigs can also be clearcoated by heating (before eyes are glued on!) in an oven to 375* and then clear powdercoated-- works like a charm. Good fishing, and I hope you enjoy the photo!

Coupla 3/4oz. PT Jigs

mustad hook

1/8 oz shakey head- 3/0 Mustad needle point.

3/8 Football Jig 4/0 Sickle Hook

lil" punkin

blue/black

1/2 oz lead jigs with #6 hook

1/4 oz Football Jig modified to make shaky head type jigs. Without collar jigs weighs approx. 3/16 oz.

mustad 5/0 hook, living rubber.

A few jigs that I have made in the past

A few jigs that I have made in the past

mustad hook

Jigs drying after being coated with Devcon 2 T

Fly patterns tied on 1/64th jig with a #8 hook.

One is foiled with an Epoxy Top Coat. Appx. 5" They can be Jigged or Cast. They have taken Yellow Fin Tuna, Bonito, Blues and Stripers.

Revenge Football head 3/8 oz., with custom craw color skirt and Zoom Lil Critter Craw trailer in watermelon red....Mean of spots and smallies......even those old green fish like them too.........:lol:

These spinjigs were designed last year and by using a Dakota Blade it gives the bass something different to look at. When the jig is lifted up and dropped the blade has a real nice gyro to it! Can also be slowly crawled or buzzed beneath the surface.

These spinjigs were designed last year and by using a Dakota Blade it gives the bass something different to look at. When the jig is lifted up and dropped the blade has a real nice gyro to it! Can also be slowly crawled or buzzed beneath the surface.

These were poured in the Do-It spearhead mold. Hook is the Mustad stainless 34007 8/0, with a separate .063" stainless eyelet. Dipped in vynil paint, with silver and pearlescent sparkles. Skirt is poly fiber, with holographic vynil outer skirt. They've caught rockfish, lingcod, cabezon, halibut, sharks, albacore, and stripers.

4oz Do-It spearhead mold, 8/0 hooks, vinyl paint. These jigs use tough vinyl cord as skirt material, and are bite-proof for our local lingcod and halibut. Overall length is 6-1/2 inches. The vinyl skirts are a little bit stiffer than a nylon skirt, and thus do not get fouled around the hook when deep-dropping them. I often fish these jigs with a 10"+ smelt or mackerel pinned to the hook, or rigged with an 8" twister tail, to keep most of the smaller fish off. Bottom jig has a glow skirt and ultra-glow head.

Everybody smile for the camera! Nylon-skirted jigs are heap big juju for lingcod. This fish went for a boatride off a Northern California reef.