Jump to content

Lure Drying Rack


JimP
 Share


Maybe someone will find value in this. This is my lure turner/drying rack. I re-purposed an old motor from a piece of woodworking gear that had a variable speed motor. Variable speed is not need but handy. The arms are about 14 inches long and 2 inches wide. One arm has paper clips screwed to both sides on the edges and one arm has the same clips on one edge and "Velcro" on the other side to hold unusual items.

Another thing you might find handy is the roller chain connecting the two arms. That works well, there is no slop during rotation so there is no need to try and balance the load at that given time. The motor is direct drive to one arm and chain driven to the next. I'm sure if needed you could extend out several more arms if needed. This setup is nice and compact, works well, and can spin +30 lures at a time if needed as configured.


 Share


Recommended Comments

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
Top