Jump to content

plopper tail1


mark poulson
 Share


I made a Whopper Plopper tail from PVC and a sst Tally Wacker tail from LurePartsOnline. I used the anvil end of a metal working vice to shape and cup the metal, because I discovered that my ball peen hammer didn't make the trip north with me. A box with that, and all my wood lathe tools, seems to have disappeared.

Anyway, 15 minutes of hammering, checking, and adjusting got me a tail that spins when I put it on a shaft and shoot air over it.

Dieter, I am even more in awe of your metal working skills!

I will be buying another ball peen hammer, some more lathe tools, and a digital caliper soon.


 Share


Recommended Comments

"If it don't fit, get a bigger hammer!"  Words to live by.

 

That was a drawing of the original bait.  I find writing down the dimensions like that helps me figure out how to build.

I made my copy 1 1/4" deep, to give the bait more of a keel, and to keep my ballast lower, to counteract the rotating tail.

 

I ground off the sharp corner of the Wacker fin yesterday, and filled both sides where the metal comes out with bondo, to make farings for added reinforcement.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
Top