Jump to content

Mini Rat-L-Trap


JRammit
 Share


2" PVC body... 1/8 oz split shot pressed into the eye hole... rattle chamber made by drilling a recess with a brad point bit, then drilling thru with a smaller bit, then putting a Daisy bb inside and capping each side with a cut up beer can...... finish is foil under epoxy, then spray paint blue/black back with white belly and more epoxy for top coat


Photo Information for Mini Rat-L-Trap

Taken with samsung SAMSUNG-SM-J320AZ

  • 3.3 mm
  • 1/148
  • f f/2.2
  • ISO 50
View all photo EXIF information
 Share


Recommended Comments

Thanks.. it wasnt as difficult as i thought it would be.. the key is getting the line tie location right.. i made 4 indentions to try different line tie locations, but the first one i tried worked great, so i didnt even have to drill any holes to fill later

Link to comment

Im completely satisfied with the action, and it didnt take any tuning to get it that way surprisingly ....... it has a tight subtle vibration, enough to clearly feel down the rod, but not as heavy a vibration as a real rat-l-trap, likely because i did not flatten the leading edge of the nose

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
Top