Jump to content

Two 3 and one half inch square bills.jpg

Photo Information for Two 3 and one half inch square bills.jpg

Taken with samsung SAMSUNG-SM-G920A

  • 4.3 mm
  • 1/60
  • f f/1.9
  • ISO 64
View all photo EXIF information

Recommended Comments

These are both made from Azek PVC trimboard.  I built them each in three days.  I primed them with Rustoleum 2X Paint/Primer, Createx paints and Folk Art metallics for the colors, and two coats of Rustoleum 2X Gloss Acrylic for the top coat.  I added clear nail polish over the eyes, and along the belly treble hook's swing path, to cut down on hook rash.

The top one is 1" thick, and weighs 20 grams with #2 KVD EWG trebles.  The lower one is 3/4" thick, same hooks.

They both swim 3-4' deep, and are stable at high speed, with a big X side to side swim.  They are flat sided, so there isn't much roll, and I tapered them down from full thickness at the shoulders to 1/2"+- at the belly, to make them more stable at high speed.  They have a 3/8" LPO metal rattle in the front part, and a smaller multi-bb rattle farther back, so they make a lot of noise.   I built them to fish fast over shallow grass, and along weed lines, and I want to provoke a reaction bite.

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...