Jump to content

homemade deep divers 3


mark poulson
 Share


Two PVC deep divers I made and tested.

The bodies are 2 7/8", the bill is 2 1/8" long and 1" wide, the baits weigh 31 grams with all the hardware.

The bodies are 13/16" wide, and 1 3/16" tall, and shaped like an RC 2.5, which I traced with a sharpie to get the shape. I like that shape.

The bills are 1/8" lexan, and are filled to a thin leading edge.

I needed 6 grams of belly ballast, both in front of and just behind the belly hook hanger, to get them to float slightly head down like a Rapala DT16.

I used .072 X 7/8" sst screw eyes for the hook hangers, and some sst wire for the line tie, which extends back 1" into the body, and is set in D2T.

I drilled 5/16" holes for the eyes.

I'll post another picture when they're painted.


 Share


Recommended Comments

My what big lips you have :blink:

Any who

those are some nice cranks :yes:

The better to...well, you get the idea. :lol:

Thanks for the nice comments, guys.

I'll find out tomorrow if they catch as well as they swim.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
Top