Jump to content

1st pour swimbait


UNO
 Share


A little ugly but my first stab and all in a mold that I made. Really posting to ask a question. Pouring in a 1 piece pop mold. What are some of the keys to getting a really good flat side. Learned the importance of not over filling as you can see. Is there any other ways to cut smoothly or is it just really important to get it right on the pour? Thanks for all the help. Posting from my phone so I hpe this works right.


 Share


Recommended Comments

for me to get a good flat side i slow down once the cavity is close to being full. i also like to pour plastic until the back is kinda mounded above the cavity that way when it shrinks it shrinks to flat instead of caving in. looking at the top of the head, that from the mold. you could try filling the cavity to just under that part on the mold and as long as you keep the plastic in the cavity you should have to worry about edges they should be perfect.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
Top