Jump to content



Photo
* * * * * 1 votes

DIY fluid bed?


  • Please log in to reply
284 replies to this topic

#281 JunebugsCustoms

JunebugsCustoms

    Member

  • TU Member
  • PipPip
  • 23 posts

Posted 03 January 2014 - 12:57 AM

LOL mine is wayyyy ghetto but it works and didn't cost me anything so who cares.  I actually used 2 solo cups, a coffee filter and a couple air fittings I had laying around the shop.  I reduce the line pressure to about 2lbs. and hook to my shop compressor.  One solo cup has pin holes punched in the bottom and the filter taped over the holes on the outside. The other cup has a hole at the base that is fitted with the fitting.  The filtered cup nests inside the fitting cup and is taped together for a decent seal. 

 

Basically I mocked it up while studying the idea of making one, and it worked, but Ive been so busy I haven't had time to make a nicer one. 



#282 Fishoutback

Fishoutback

    New Member

  • TU Member
  • Pip
  • 1 posts

Posted 28 January 2014 - 12:45 AM

Cadman, can you please send me a copy of your instructions for a fluid bed?

Thanks.

emorrison@frontier.com



#283 cadman

cadman

    Advanced Member

  • TU Sponsor
  • PipPipPip
  • 2,758 posts
  • Location:
    Illinois

Posted 28 January 2014 - 07:27 AM

Cadman, can you please send me a copy of your instructions for a fluid bed?

Thanks.

emorrison@frontier.com

Instructions sent



#284 fishon-son

fishon-son

    Member

  • TU Member
  • PipPip
  • 153 posts
  • Location:
    michigan

Posted 22 March 2014 - 08:47 PM

greg8048a@yahoo.com

 

 

BIG THANK YOU.....



#285 cadman

cadman

    Advanced Member

  • TU Sponsor
  • PipPipPip
  • 2,758 posts
  • Location:
    Illinois

Posted 23 March 2014 - 06:53 AM

greg8048a@yahoo.com

 

 

BIG THANK YOU.....

I sent you the instructions via e-mail. Let me know if you received it.