Jump to content



Photo
- - - - -

Home Made 1/16 Oz Jigs


  • Please log in to reply
6 replies to this topic

#1 fisheye56

fisheye56

    Member

  • TU Member
  • PipPip
  • 79 posts
  • Location:
    Dallas Ga.

Posted 17 February 2012 - 10:42 AM

Here are a few of my crappie jigs I made this week to fish with tomorrow! weather permitting! I hand pour my heads, powder coat, then tie with several diffrent materials....I can't tell you what it does for me when you not only catch fish with your own creation...but when you load the boat!!!! It just don't get any better!!! Hope you like them! Oh one is my version of a Hal fly...I made my own mold for that and poured the soft plastic too!!!

Attached Files



#2 Tony Maxwell

Tony Maxwell

    TU Supporter

  • TU Member
  • PipPip
  • 276 posts
  • Location:
    Southwestern Ohio

Posted 17 February 2012 - 05:16 PM

Good looking jigs. I see you like the Sickle hooks. I have noticed the gap between the hook point and the eye is smaller for any given size, but they sure are sharp. Good luck tomarrow,

#3 fisheye56

fisheye56

    Member

  • TU Member
  • PipPip
  • 79 posts
  • Location:
    Dallas Ga.

Posted 21 February 2012 - 10:15 AM

I caught 18 fish...only 2 were quality....great feeling to see my jigs down in the fish's mouth!!!

#4 topdog5050

topdog5050

    Member

  • TU Member
  • PipPip
  • 13 posts
  • Location:
    Georgia

Posted 29 July 2012 - 04:07 PM

Nice and you are from Georgia.

#5 Fatman

Fatman

    Advanced Member

  • TU Member
  • PipPipPip
  • 507 posts

Posted 22 August 2012 - 06:47 PM

fisheye

Nice looking jigs!!! If you're really into tying crappie jigs you should give a visit over to jigcraft.com. Lots of good tyers and you might find some more ideas for new ties!!!

#6 smalljaw

smalljaw

    Advanced Member

  • TU Member
  • PipPipPip
  • 1,417 posts
  • Location:
    Pennsylvania

Posted 24 August 2012 - 02:50 PM

They are really nice jigs and I'm here because I just had a great day fishing using some jigs I just made. I just started using the UV2 line of products from Spirit River and the fish were hitting my jigs really hard today, I don't know if it is the UV enhancer but I can tell you without a doubt the materials were awesome to work with and looked amazing in the water, all the action and look but the workability is way better than what I've used before. Take a look on Youtube, Spirit River has a lot of videos on tying but they also do a great job of explaining the materials and trust me, I tied for a long time and I feel like I took a class as the quality has just gone throughh the roof. Forgive me for the rant, I just got home from a really good day on my jigs and I'm now a firm believer in Spirit River tying materials, I never had this much fun!!

#7 streamdancing

streamdancing

    Member

  • TU Member
  • PipPip
  • 28 posts
  • Location:
    Ga

Posted 02 September 2012 - 12:09 PM

Hey Fisheye...good looking jigs...heck I'd bite those suckers! Boyd