Jump to content
bryanmc

Do It Umbrella Rig Mold

Recommended Posts

I've used them. They may be a little heavy compared to the resin molds but have had no issues with it. When you load it up with five big swimbaits that have a roundhead jig that weighs 1/4 ounce another half ounce is not going to hurt. I make both, one from resin and the lead one as well and can't tell that much difference.

 

The resin ones are easy to make without a mold. Cut your wires and tie together, get a tube of JB Water Weld and form around your wires and let cure. Sand the resin into the shape you want (I use a dremil tool) and paint or leave it's natural color. You don't have to seal it unless it's painted. The water weld tha's sold at Dollar General is about half the price as the JB Weld brand and works just as well.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top