Jump to content
FatSack

Bubble Buster For Epoxy

Recommended Posts

Has any body used this? Its from Mudhole tackle. I have used a product for rolling urethanes that is added to the paint when mixed. But never seen a product that busts bubbles when sprayed

Its designed for rod building, just curious if this would work on top coat epoxy for lures

See video below

Edited by FatSack
Link to comment
Share on other sites

At a rod building event a couple of years ago one of the builders used canned air to burst bubbles on the epoxy finish on the wraps.  He just passed over the epoxy quickly, lightly and bubbles broke.  Seems like it depended on just right of air flow (not too direct or too light).   Some other rod building guys used butane micro heat guns.  This is what I use on rod epoxy. Again not too much heat -just a light touch.  More than one way to do this.  I thought about using a hair dryer but don't since dust in the air can be kicked up.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top