Jump to content
ravenlures

Sand Paper For Lathe

Recommended Posts

When I turn a piece of wood on my lathe I used to have two pieces of sandpaper one 80 grit and a120 grit always sand with one and then pick up the 120 for finish, now maybe this was brought up somewhere before but I take a full sheet of sandpaper and spray adhesive the sides of both the 80 and 120 and stick together and then cut into strips, 80 grit on one side and 120 on the other just flip and sand. Works great, plus it makes it thicker and stronger, do any grit you want. :twocents:

Wayne

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top