Jump to content
Painter1

Spire Jig Parts

Recommended Posts

I am going to order this mold and could not find the size for the eyes.  The site says "none".

 

http://store.do-itmolds.com/Spire-Point-JigbrSz-18-14-38-12-34brHk-410-or-413brCollar-Flair_p_439.html

 

I am also hoping the Owner 5304 hook will work in lieu of the EC410

 

http://www.barlowstackle.com/Owner-5304-Jig-Hook--P426C41.aspx

 

 

 

Link to comment
Share on other sites

The Owner 5304 hooks will fit in that mold except the 2 smallest cavities, where the hook shank touches the cavity wall. Heat the hook and put a kink in the shank and it will fit fine. Pic below shows 5/0-1/0 hooks in mold consecutively from biggest to smallest. Mold halves close on all hooks in mold. 2/0 hook will not fit in the 1/8 oz cavity but a 1/0 will. Also if you look around you will find better mold and hook prices along with some reasonable shipping costs.

IMG_0012.JPG

IMG_0012.JPG

IMG_0012.JPG

IMG_0012.JPG

IMG_0012.JPG

IMG_0012.JPG

IMG_0012.JPG

IMG_0012.JPG

post-13040-0-08238000-1405507758_thumb.jpg

Edited by cadman
Link to comment
Share on other sites

Thank you, Sir. Do you know what size eyes this takes?

 

I am not at home right now so I can't measure them. I have a chart at home. PM me your e-mail and I will send you the chart.

 

Note: The sizes I have are eyes made by WTP. These are the only ones I use since they are the only ones that I have found that stick really well without moving, when I apply epoxy.

Edited by cadman
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top