Senkosam Posted February 4, 2005 Report Share Posted February 4, 2005 Here's a pic of the Hollow Worm that was in a previous post. Quote Link to comment Share on other sites More sharing options...
NJFishRGuy Posted February 4, 2005 Report Share Posted February 4, 2005 Frank, Really cool bait! BTW... how many coats of Valspar, one or two? Quote Link to comment Share on other sites More sharing options...
NJFishRGuy Posted February 4, 2005 Report Share Posted February 4, 2005 I just read your explanation... I had missed it before. Cool technique and easier than the way I first described it... Quote Link to comment Share on other sites More sharing options...
Senkosam Posted February 4, 2005 Author Report Share Posted February 4, 2005 The worm was from Bob's mold. The nice thing about it is that, as a jerkworm with girth, it's walls completely collapse, making it easier for the hook set. I figure a wide gap hook is still necessary as a keel and to prevent twist. Should be interesting this spring. Quote Link to comment Share on other sites More sharing options...
BigZ Posted February 4, 2005 Report Share Posted February 4, 2005 Only way I could think of doing it .... if you put a dowel or something through the pour funnel on the stick mold while the plastic was liquid still...blow it up while it was still hot...and melt the end shut with a lighter? Quote Link to comment Share on other sites More sharing options...