CountryKat Posted June 27, 2005 Report Share Posted June 27, 2005 I need to find a pumkin color skirt with black tips. I can't find them in janns, Barlows, Stamina, or Cabelas. Anyone have some of these I could buy or have a link to a place that sells them? Thanks Jim Quote Link to comment Share on other sites More sharing options...
heavycover Posted June 29, 2005 Report Share Posted June 29, 2005 I've never seen the color you're looking for. Have you considered dying the material? Quote Link to comment Share on other sites More sharing options...
CountryKat Posted June 29, 2005 Author Report Share Posted June 29, 2005 Do they make a permenant dye? I was going to cut 2 skirts into 1. Quote Link to comment Share on other sites More sharing options...
heavycover Posted June 29, 2005 Report Share Posted June 29, 2005 CountryKat, not sure about permanent. But I bet these guys can give you a little more insight. http://www.lakehawk.com Seems like they have a dye for everything. Quote Link to comment Share on other sites More sharing options...
woodsac Posted June 29, 2005 Report Share Posted June 29, 2005 I know some of the guys use Rit Dye. Check out these links for some good info http://www.tackleunderground.com/board/viewtopic.php?t=1049 http://www.tackleunderground.com/board/viewtopic.php?t=2375 http://www.tackleunderground.com/board/viewtopic.php?t=2900 Quote Link to comment Share on other sites More sharing options...
bladesandbaits Posted June 30, 2005 Report Share Posted June 30, 2005 CountryKat,Call Rat Trap Bait Company Auburndale Fl. 863-967-2148 300+ colors and if I am not mistaken,they have it. Bubba will tell you in 30 seconds if he has it.I am away this week and would look at my sample chart to verify it but am pretty sure they have it. If he doesn't they will run some for you but you will have to order a min. Good Luck Blades Quote Link to comment Share on other sites More sharing options...
CountryKat Posted June 30, 2005 Author Report Share Posted June 30, 2005 I have all the samples from Rat trap, they don't have the skirt I'm looking for. I will have to underlay the black and put the pumkin on top of it. Thanks for all the help though. Quote Link to comment Share on other sites More sharing options...
WidowMaker Posted July 1, 2005 Report Share Posted July 1, 2005 Maybe you can use Sharpie Brand permanent marker to color the silicone. Ive never tried it but maybe it will work. You will need three pieces of wood. Place the ends of the tabs (which will be cut off) between two pieces of wood and clamp the two pieces together. Allow the tabs to drape across and hang down one side of what will be the middle piece of wood. Then clamp the third piece of wood in place to hold the tabs flat so you can use the Sharpie. It may not color the inside cut surface of the silicone but then again it may. Maybe by not coloring that area it will give the tips a 3-D type of effect. Quote Link to comment Share on other sites More sharing options...
