BassSleighR Posted December 18, 2005 Report Share Posted December 18, 2005 i would like to have the ability to put rattles in my tube jigs i have noticed a few jigs that you can buy that have a glass ratlle barely molded in. does this require a special mold has anyone done this or know how to i have used two different style of tube jig molds and have not seen any out there that have a cavity made for a rattle the gluing thing is not an option. Thanks Quote Link to comment Share on other sites More sharing options...
texasbass1 Posted December 22, 2005 Report Share Posted December 22, 2005 I take a small piece of heat shrink and use it to place a glass rattle on the hook. It works real good for me Quote Link to comment Share on other sites More sharing options...
WidowMaker Posted January 2, 2006 Report Share Posted January 2, 2006 Would there be any way you could use an aluminum or brass rattle and solder it to the hook? Maybe perhaps use one of the skirt band rattles and wrap copper wire around the rattle collar then solder the wire to the hook? Quote Link to comment Share on other sites More sharing options...
