All Activity

Jig Man, Looks like that mold has been discontinued. I like it because it has the heavier 60 degree straight eye hook. Believe it or not I sell a lot of these because guys don't like the 90 degree aberdeen style hook. Here is a pic of the mold.

I must be doing something wrong. I can’t find the mold. What I find is 473219 TX.

So how are you guys making skirts without this tool?

I am pouring the jigs. They are 1/8, 3/16 and 1/4 oz. The mold is Do-It #3019 Tube-TX. The jigs will be powder painted for ease of sliding them on. The tubes I will be using are Poor Boys 4" tubes

I use spit. If I used anything else it would be all over me and the boat. What sizes of heads and tubes are you using? Are you pouring the heads? Are you pouring the tubes?

X 2 with the smelly jelly , though any oil / scent helps slide things in place . Darker tubes I use crawdad scent and for the lighter colors I use a shad or other scent . Works great on Huddlestons to slip past teeth in a bass for better hook ups . Have fun with the tubes !

22 works best for regular silicone, 24 for fine cut. Allen

Fishingskirts.com or Hobby Lobby. Allen

Smelly Jelly - Liquid or Jell

I just re-tie. Most don't do it often enough anyway. Takes 10 seconds.

I'm getting into tube fishing and trying to put tubes onto tube jig heads and my question is this. What is the easiest way to get these on? I am thinking anise oil so the tube slides easier over the jig. Any better ideas. Is anise oil a good choice or should I use something else to make it slipperier so it would go on easier. Thanks for any help.

Lookin great. Arne

Sorry if im in the wrong section but i wanted to share my progress on making glide baits. First bait was maybe july/2023 and the bottom was a week ago. Best thing is they actually glide/swim instead of roll to tye surface. I still need to get better with my carvings as that hasnt improved much, i can't seem to get those nice crisp cuts that i see others make. Maybe im not sanding enough??.

Any chance you could get 1?

if someone wants to send me dimensions, i'll print one?

We stopped carrying this tool around 3 years ago because we rarely, if ever, received them from the manufacturer. Matt Barlow Barlow's

I will print them. Do you mean, I should make a solid one, check how it is behaing and upon this drill the holes(moel the new one with holes?)?

Welcome to Tackle Underground. Google The Fly Shack and see if those work for you.

Make a blank without weight test it and then make the internal one. I test mine then drill the holes, I am assuming yours are machine made or split design.

Hi everyone first post here. Does anyone know of a vendor that has black brass beads for building spinners? Most vendors have plain brass or nickel plated. Thx

Hilts mold Make arkie head molds from 1/8oz to 3/4oz. You have to specify which molds you want. They make there mold with weed guard and without weed guards but on the molds without the guard it is cut down too the jig head but stops just before. That the ones I have i drill it out to insert small pins for 9 and 11 fiber weed guards. Ive hold the molds for going on 40 years now. The molds can be modified to hold a flat eye hook I use all light wire mustad black nickel hooks in my molds Download the catalog scroll down til you found the arkie head jigs They have a phone number leave a message they will return your call.

Similar to proprionate..

If you find a 3/4 oz Arky jig mold that has a vert. eye hook slot you can use a dremel ro a drill press to modify it to take a flat eye. I do the reverse and it's easy.

If you want to add hardener, mix it well into your cold plastic before you heat it, or all you'll wind up with is hard lumps.

thanks fpr the answer @Flaswimbaiter! Guess I have to print various, not sure if they survive being openend ans closer several times. thought staring maybe here: or like this: