Jump to content

7 5 2013 Crankbait


Cyberflexx
 Share


This started as a white bass pro shops bargain bin "tournament special". I primed it white, custom mix chartruese on the sides, a little pearl white on the top with a light blue spine and scale pattern. Yellow belly and pink throat. I used a red sharpie for the gill blood streaks and the dotted eyes and a black sharpie for the diamond kill dot. I used harbor freight 5 min epoxy diluted with rubbing alcohol and a tad of blue glitter mixed with it. Cured on the drywheel for 9 hours. I'm getting better and better... Whatcha think?


 Share


Recommended Comments

Looks good Cyberflexx. You did a good job on the "fades" where the paint transitions from one color to another.

 

If I were you I'd make sure the 5 minute epoxy your using for a top coat is waterproof and not water resistant. I'm not familiar with the Harbor Freight epoxy, but all the 5 minute epoxies I'm aware of aren't "waterproof". You might also check to see if it is UV resistant. I'm thinking that most of the 5 minute epoxies aren't. It would suck to have a good paint job ruined by the epoxy going bad or turning yellow.

 

Ben

Link to comment

Thanks Ray.. I'm new to painting and not an artist by no means.  I think the diluted epoxy on my walmart acrylic paints help with the fading.  Thanks for the tip!..  I'll have to check on that epoxy before I paint anymore.  This was the only one that I have done with the HF epoxy, the others were Lock-tite brand from Walmart.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
Top