miketr20 Posted November 12, 2007 Report Share Posted November 12, 2007 Where can i find crankbait parts such as the weight and the wires and etc. Quote Link to comment Share on other sites More sharing options...
Jason Posted November 13, 2007 Report Share Posted November 13, 2007 check out staminainc.com Quote Link to comment Share on other sites More sharing options...
BobP Posted November 13, 2007 Report Share Posted November 13, 2007 lurehardware.com is a source if you're looking for premade integrated ballast/hook hangers. It's easy enough using .040 soft brass or soft stainlless steel wire (aka safety wire) to do wire frames. mcmasters.com is a good source for that and for polycarbonate or circuitboard sheets. Quote Link to comment Share on other sites More sharing options...
miketr20 Posted November 13, 2007 Author Report Share Posted November 13, 2007 i have looked at the mcmasters website and doesnt seem to be a tackle website. I cant seem to find the little weights to insert into the crankbait. Quote Link to comment Share on other sites More sharing options...
BobP Posted November 13, 2007 Report Share Posted November 13, 2007 Yes, McMaster-Carr is a general materials retailer. A good source for RAW MATERIALS for crankbaits, like wire and lip material. Lurehardware.com carries the belly weights plus some wood blanks and pre-made lips. Jann's Netcraft also has wood bodies and lips. It all depends on how much of the crankbait you want to make yourself. I don't build enough of any particular design to warrant buying a bunch of belly weights of a specific size - so I often use lead solder to ballast lures. Quote Link to comment Share on other sites More sharing options...
VANNDALIZER Posted November 13, 2007 Report Share Posted November 13, 2007 I have them. PM sent. Quote Link to comment Share on other sites More sharing options...
