Jump to content
IamSpartacus

Bending Lexan

Recommended Posts

Mike that post is pretty long winded, but it works, since then I have made a small former or press (brass tubing) with which I make all my lips now. I will post another way of hot bending (for r/ angle bends etc) soon, I just have to take some pictures, as you can see from that old post, I can type all day and it just confuses everyone. pete

Link to comment
Share on other sites

Hello Pete,

In the photo...on the thread that ernel shows above...where did to get the harness that you have in the crank bait shown there?

It looks like copper was used,I'm thinking of using the same type harness...maybe stainless in some poly cranks.Just wandering where to get my harnesses stamped out at once I have models for the different cranks.

Link to comment
Share on other sites

Hello Pete,

In the photo...on the thread that ernel shows above...where did to get the harness that you have in the crank bait shown there?

It looks like copper was used,I'm thinking of using the same type harness...maybe stainless in some poly cranks.Just wandering where to get my harnesses stamped out at once I have models for the different cranks.

Hawghuua

The hook hanger is made of brass (1mm), I had a die made about 20 years ago and had about 3000 stamped out- very strong and they add some weight. I used to sell lures back then.pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top