Slider Posted February 3, 2008 Report Share Posted February 3, 2008 Hi everyone I now working for little swimbait, but I have big problem I don't know make effect scale of fish. I always make scale of fish, draw pencil on the aluminium foil. How make this ? Very sorry for my English. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted February 3, 2008 Report Share Posted February 3, 2008 Hi Slider and welcome to TU. Don't worry about the English, we can all understand what you have written. Below is a tutorial, from the member submitted tutorials section. This excellent document should get you started. If their is anything that you don't understand, just post a question. http://www.tackleunderground.com/forum/showthread.php?t=5195 A lot has been written on this subject, so you should find a wealth of information if you try the search function at the top of the page. But, you can always ask, if you cannot find what you are looking for. Quote Link to comment Share on other sites More sharing options...
parrothead127 Posted February 3, 2008 Report Share Posted February 3, 2008 I had a knurling roller made for this. For an easier understanding of this, it is just like the knurled (diamond shaped) handle on a ratchet handle. Until I had this made, I very carefully rolled a ratchet handle around the foiled bait and it worked fine. The roller I had made just works easier, but gives the same results as the ratchet handle did. I hope this will help you out Slider. Scott Quote Link to comment Share on other sites More sharing options...
Slider Posted February 3, 2008 Author Report Share Posted February 3, 2008 Thanks guys. Yours answer very help me. I take for now behind my swimbait scale . Slider Quote Link to comment Share on other sites More sharing options...
