Jump to content
MarcDavidBaits

Gloss Top Coat

Recommended Posts

Bass Wisperer - there a quite a few, with quite a few pros and cons, but I don't think Createx gloss coat is quite up to the rigores of teeth, sun, cold water etc (I have never used it though).

If you do a search for "Devcon 2 Ton" (D2T), 'Dick Nites' clear coat (or DN Clear), 'Etex', there are vast amounts of info here, also have a look at the "Tutorials", there is at least one on how to apply top coat etc (by 'Fatfingers). pete

Edited by hazmail
Link to comment
Share on other sites

Dick Nite's Lure Coat gets sprayed by a few here, and say they have good results. I have never sprayed it, but have coated with a brush and it is good gear. You would have trouble spraying epoxies, like D2T or Etex without specialised guns and a lot of money. DN usually has an add at the top of the home page. pete

Link to comment
Share on other sites

Get the Dick Nites. Click the link when it comes up at the top of the page.

Read all the information on how to keep it from curing in the can. Use the search function to find the information.

You'll like it.

Clean your gun with acetone after you use Dick Nites. Then clean it and backwash with acetone next time you get it our and it will be fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top