Jump to content
mpashnt1

Paint Clear Coat

Recommended Posts

I like Dick Nite Fishermun's Lurecoat, a moisture cured polyurethane, for coating jig and spinnerbait heads. It was designed to coat metal spoons. Dip them in and hang to dry, dry to touch in an hour, then the moisture cure process begins and makes the coating tougher over about a week. Very thin coating, very clear and non-yellowing. Click on the Dick Nite banner ad here on the site for a discount price, or even a small quantity to try out for the price of shipping. You should search for Dick Nite threads to see its storage and handling requirements. I've also used Devcon 2 Ton Epoxy to coat jig heads and it works well but is much thicker. Get it in a double syringe at Walmart for $2, thoroughly mix it and paint it on with a small brush. Both of them are fairly impact resistant but can be chipped if thrown directly against a rock.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top