Jump to content
Thad

Components for my spray booth?

Recommended Posts

I've read a lot over that past few months about spray booths and I just moved so I have to get one made because I'm in an apartment now. I think I'm going to make a smaller version of this:

http://www.tackleunderground.com/forum/hard-baits/12239-new-paint-booth.html

Here is where I'll be putting it:

100_0775.jpg

And the distance to the window:

100_0776.jpg

Here is the opening in the window that I will be putting the hose through:

100_0777.jpg

I do use automotive paints and I spray my clear coat, so keep that in mind.

I'm going to use plywood for the box and that's really the only components I know what I need for sure.

What do I use for the filter that goes over the open hole in the booth?

What type of hose do you recommend?

Finally, and my biggest question. What fan do I use? I have searched forever for a fan. I don't want to spend hundreds on a fan. I know it needs to have the motor on the outside of the fan. Do you have any links to a fan that would work? As you can see in the pictures the hose will need to be about 6' long and will have two elbows in it.

Thanks

Edited by Thad
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top