BrownPigs Posted May 6, 2009 Report Share Posted May 6, 2009 (edited) Does anyone know where I can get sheets of thin plastic. I want to make my own crankbait lips. Is there a place like home depot or hobby shop that has them or do I have to order them online? And if so what online stores do people here recommend? Edited May 6, 2009 by BrownPigs Quote Link to comment Share on other sites More sharing options...
JBlaze Posted May 6, 2009 Report Share Posted May 6, 2009 (edited) Have never ordered from this place but their prices seem reasonable. Order Plastic Polycarbonate Sheet in Small Quantities at OnlineMetals.com Also, you can get a 12" x 12" piece of 3/32 Lexan brand polycarbonate at home Depot. If you are looking for circuit board, http://www.mcmaster.com/#garolite-sheets/=1r38qg has it but from what I have read here in the TU posts, it is not the white colored board. Hope this helps. John Edited May 6, 2009 by JBlaze Quote Link to comment Share on other sites More sharing options...
BobP Posted May 6, 2009 Report Share Posted May 6, 2009 McMaster-Carr sells both polycarbonate and circuitboard at good prices. Also a good selection of wire. Check them out at mcmaster.com Their G-10 circuitboard is an ugly (IMO) yellow. The G-11 is a more pleasant light green, but costs more. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted May 6, 2009 Report Share Posted May 6, 2009 Stear clear of acrylic sheet, it is brittle in cold water apparently. No cold water in my neighborhood though. Dave Quote Link to comment Share on other sites More sharing options...
