miragestalker Posted November 11, 2009 Report Share Posted November 11, 2009 (edited) Just messin around in the garage and figured to go ahead and advance development of my jointed lures. This is primarily a test of the joint system I will be using when I get my skills down. Its a two joint shad lure with 2 hooks, a pyramid tail just like similar to Big Hammer plastic swimbaits, about 1-2 oz and 4 inches long. I am thinking that the wood around the pin will be reinforced with fiberglass just for good measure. Edited November 11, 2009 by miragestalker Quote Link to comment Share on other sites More sharing options...
Matt Moreau Posted November 12, 2009 Report Share Posted November 12, 2009 Let me know how that joint works out for you. I messed around with the idea of having the "V" reversed like that but never could get it to swim right. I think it traps the vorticies and doesnt distribute them thus not havin a swiming action. I though I could drill blow through holes to let the water pass through but never took it to that point. Quote Link to comment Share on other sites More sharing options...