Fishwhittler Posted November 28, 2009 Report Share Posted November 28, 2009 Is there any difference between Envirotex Lite and Envirotex Lite pour-on? I noticed that some Envirotex epoxies are "pour-on" but others are listed as "Envirotex Lite" without anything about "pour-on". Can someone shed some light on this? Ben Quote Link to comment Share on other sites More sharing options...
BobP Posted November 28, 2009 Report Share Posted November 28, 2009 (edited) I'm no Etex expert but the only Etex I've seen at Michael's Craft stores says "Envirotex Lite Pour On High Gloss Finish" on the kit box. Looking at various sites I Googled, they are all the same Pour-on product. Edited November 28, 2009 by BobP Quote Link to comment Share on other sites More sharing options...
21xdc Posted November 29, 2009 Report Share Posted November 29, 2009 I use it and it's all pour on. Quote Link to comment Share on other sites More sharing options...
Fishwhittler Posted November 29, 2009 Author Report Share Posted November 29, 2009 The reason I asked was I noticed some reviews of the "pour-on" epoxy that said they wished that it was more scratch resistant so I was wondering if there are more than one E-tex epoxies. Thanks for clearing that up. How good is the scratch resistance of E-tex compared to Flex Coat or Devcon? Thanks Ben Quote Link to comment Share on other sites More sharing options...
BobP Posted November 29, 2009 Report Share Posted November 29, 2009 (edited) JMHO, all epoxies have similar scratch resistance. If you want harder/slicker, you have to go to a catalyst enhanced auto or moisture cured polyurethane. That's not to say that epoxy is less good. It is very durable, impact resistant, tooth proof, and cost effective. Different finishes have different advantages. Edited November 29, 2009 by BobP Quote Link to comment Share on other sites More sharing options...
