Jump to content
martin790

Removing Middle Seat And Putting In Floor

Recommended Posts

I had a 15' jon boat that didn't have a middle seat and they hadn't done anything special to strengthen the sides. This was from the factory that way. I would recommend that you don't use a strap across the top of the boat to attach it to the trailer, which would tend to pull the sides in. Just use the front eye and the two back eyes to hold it on the trailer, if you use a trailer. Musky Glenn

Link to comment
Share on other sites

I have a 17ft Aluminum open Jon boat with a tiller engine. I built it by converting an old Tracker Bass boat, ripping out the console ect in the middle. I also shortened the raised deck at the back by 2ft as I did not need livewells. I now have an 8ft lower deck. I have used this boat since 2006 with no problems whatsoever.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top