archeryrob Posted January 17, 2012 Report Share Posted January 17, 2012 Anyone here make a tail weight mold. The type of round weight like an in line lure body but with a larger hole. The do it mold only goes up to 3/8 and the hole is for under .035 wire which might be a little too light for stripers and blues Quote Link to comment Share on other sites More sharing options...
crankpaint Posted January 17, 2012 Report Share Posted January 17, 2012 you can make one just like the belly weight mold in the tutorial or use that to do the same thing?i just drill a hole in the tail add my hook hanger and pour the lead into the hole,and if your worried about the hanger pulling out you can pin it in by putting a peice if wire/small nail thru the side i=of the bait so it gos thru the hole were the lead will go to hold it in place Quote Link to comment Share on other sites More sharing options...