Oncorhynchus_tshawytscha Posted March 1, 2005 Report Share Posted March 1, 2005 Hey everyone, I have been lurking on this site for about a month or two now, and posted on a couple of hard bait photos, but now I actually have the courage to post on the main forums. I was reading the "Need advice on the proper primer seclection" forum topic, and have switched over to Kilz 2 Latex Primer after reading the posts on that topic. My questions is this; do I need to sand between coats of the primer, or just after I am done with the final coat? (I'm currently dipping my balsa lures twice in a thinned down Kilz 2/water mix.) Thanks, Brock Quote Link to comment Share on other sites More sharing options...
Lure--Prof Posted March 1, 2005 Report Share Posted March 1, 2005 I always hit mine with a fine foam sanding pad between primer coats...I use the thin gray ones from Wal-world that say Fine/150 on the back; they feel equivilant to 400 regular sandpaper. Their non-creasing flexibility makes them ideal for lure contours. Dean Quote Link to comment Share on other sites More sharing options...
