dragline Posted May 1, 2005 Report Share Posted May 1, 2005 I apologize for any redundancy concerning this subject. To the point - Does anybody have any info on constructing a drying rack or wheel? I have a small rotisserie motor. I am making Musky lures 5-8 inches (using screw - eyes). And how do I attach the lures to the rack/wheel? Thank you! Quote Link to comment Share on other sites More sharing options...
striperchaser Posted May 1, 2005 Report Share Posted May 1, 2005 Just read it check here http://www.tackleunderground.com/modules/mx_kb/kb.php?mode=article&k=8 Quote Link to comment Share on other sites More sharing options...
black label plugs Posted May 2, 2005 Report Share Posted May 2, 2005 cut plywood into 12" round circles. spread apart at 12" using wood dowels. before attaching dowels put both circles mark every 3" then put screw eyes inside circles about 1/2'' down from mark on both sides. now put a spring on both sides .now put it all together and put it on the rotossie. you will have to drills holes for the to forks that attach to rotissie. i have beeen using this rack for a long time on swimmers and works great. good luck Quote Link to comment Share on other sites More sharing options...
5Keepers Posted February 20, 2007 Report Share Posted February 20, 2007 Hello, HHEELLP....I need some info in a drying system, how to everything..I have read post after post until my eyes are burning. I am painting with createx, using a Badger 150 airbrush. I have been able to get the colors/finish I desire. I have learned more than I can retain in the last few days.. The drying system is what I need more than anything. Is this airbrush ok? Does anyone spray ultra-fine glitter through their brush?.. what is the best way to apply glitter? I know.. too many questions in one post... sorry... THANKS! Steve Quote Link to comment Share on other sites More sharing options...
Tony Maxwell Posted February 26, 2007 Report Share Posted February 26, 2007 Glitter : I mix it in with my clear coat "2 ton Epoxy" and brush it on. Tony Quote Link to comment Share on other sites More sharing options...
skeeter jones Posted February 26, 2007 Report Share Posted February 26, 2007 here is a thread with pictures /www.tackleunderground.com/forum/showthread.php?t=8281&highlight=drying+wheelhttp://http://www.tackleunderground.com/forum/showthread.php?t=8281&highlight=drying+wheel Quote Link to comment Share on other sites More sharing options...
