Jump to content
Terrydabassman

Have any of you foam

Recommended Posts

Well, Terry, I did think about it at one time.

But, the way I pour a foam bait it would really

be tough to do.

I only pour half of the mold, then place the other

half over the first and clamp. I then rotate the

mold 360 deg. in end over end and side over

side movements. I just can't see the foil hanging

in there. Unless you can cover the entire mold

in foil, which may be possible.

Coley

Link to comment
Share on other sites

A lil off topic but....

I do remeber that if your casting featherlight or similar urethane plastic in an RTV silicone mold, you can spray the mold halves with primer before casting & the urethane body will come out of the mold pre-primed.

You'll probably still want to clean up the body before painting to remove any residual silicone oils.

I thin the foil idea could work, with enough trial & error, shoot, with enough extra flashing, you might not even need a mold release on the bondo & putty molds you guys been havin success with.

if anyone tries it, keep us posted.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top