johnnytheboy Posted June 25, 2005 Report Share Posted June 25, 2005 Hi There, I was wondering if etex suffers from the old fish eye, i have my first two lures that i used etex with and there are patches that aren't covered at all as if the etex has been pushed away from that area?? I was wodering if i degrease these lures and give them a second coat do you think it will be ok?? One last thing sorry about this, does etex wet flatten and polish out ok once cured?? Thanks again Tightlines John Quote Link to comment Share on other sites More sharing options...
Richoc Posted June 25, 2005 Report Share Posted June 25, 2005 Hi, You put it on to thin..... Or had contamination on those spots. Most likly you put it on before the reaction had finished mixing. Let it go completely clear before putting it on. It will thinken while standing...15 mins before putting it on. You can go right back over the top ...with out any surface prep. It will bite in to it self no problem. Rich Quote Link to comment Share on other sites More sharing options...
RiverMan Posted June 26, 2005 Report Share Posted June 26, 2005 Rich is right...too thin, just come back over the top of it with a couple coats and you will have a masterpiece......Devcon will do the same thing by the way if put on too thin. jed Quote Link to comment Share on other sites More sharing options...
johnnytheboy Posted June 28, 2005 Author Report Share Posted June 28, 2005 excellent cheers guys can i ask one last one, i got syringes to measure the etex on someones advice possibly yours jed, the baits i'm building are all about 6" pike lures how much etex do you mix up and for how many baits??? thanks again john Quote Link to comment Share on other sites More sharing options...
