kbkindle Posted January 25, 2006 Report Share Posted January 25, 2006 kbkindle here what order do you make a woodlure here is what i do maybe wrong #1 cut out profile #2 drill holes for belly weight, rear wire hook hanger front wire hook hanger if i use them , cut slot for bills and glue in belly weights and wires #3 sand out lure to my likeing #4 prime , sand primer if any inprofections re prime #5 paint #6 glue in bill #7 devcon two ton #8 put on drying wheel what am i doing wrong i have not had any problems but i only have done about 6 lures so far. just want you experts to check me out. thank guys kb Quote Link to comment Share on other sites More sharing options...
Coley Posted January 25, 2006 Report Share Posted January 25, 2006 I think you got it down pat. Coley Quote Link to comment Share on other sites More sharing options...
apb Posted January 27, 2006 Report Share Posted January 27, 2006 Between steps 3 and 4, I seal the plug. Mix of boiled linseed oil and mineral spirits for me. Let dry for a week, then prime. Oh you also forgot the last part, take them fishing Andrew Quote Link to comment Share on other sites More sharing options...
