Jump to content
Ranger519

Reproduction of a two piece injection mold

Recommended Posts

I have a two piece Injection mold for a swimbait. I am trying to reproduce the master mold. At the current time I am using dow chorine RTV to make imprint plug of the master mold. I am having some issues with the reproduction mold, faces are'nt matching up and shrinkage when I pour procast 20 into the imprint plug. Any suggestions with a different proccess in reproducing a mold off of a master mold. Thanks.

Link to comment
Share on other sites

You will not be able to make another master off your current mold its rooted,you will have to start from new,about the only thing you can do is gut the middle of the mold out on one side, fill it in with clay and place your master in,this will save alot of work without having to set up inlays and sprue holes etc.And yes you can make other molds of a master mold.

IMAG0080.JPG

IMAG0080.JPG

IMAG0080.JPG

IMAG0080.JPG

IMAG0080.JPG

IMAG0080.JPG

IMAG0080.JPG

IMAG0080.JPG

1801_thumb.attach

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top