Leaderboard

I just wonder if you take 100 lures to a chrome place and see what it might cost. Might not be that bad. I am not interested in chrome health factors, and I have enough colors to work with. Wayne

It does sound really good, and I will watch the videos on it in the future, but ....... I went to the web site. http://www.superchrome.ca/superchrome.php For the beginners kit, $299 US is a bit steep to experiment with, at least for me. Also, just how "easy" is it. The site says to have a professional clean booth, something I don't own or have access to. Don't get me wrong, if it works, and if you can get the same number of lures out of this as you can with 8 oz of regular paint, then maybe. Worse yet, it has its own clear, and I have no way to know if it is going to be good enough for our needs. I do see that in their web site that they link into a guy that paints fishing lures, and that gives me hope......... http://www.superchrome.ca/DIY-superchrome.php Final thoughts, Primer is a urathene 1.2 to 1.4 mm gun tip for the primer 36+ hours for solvent to evaporate or several hours in a drying oven 0.8 to 1.0 mm tip for the chrome spray 72+ hours for solvent to evaporate or oven dry again 1.2 to 1.4 mm gun tip for clear coat 12 hours cure, or oven again. Total, two different guns, 120 hours in drying times from start to finish. I just don't have those abilities for my hobby use.

we use transtar. a quart with hardener is approx. 29.00 canadien funds. .it dries in 6 hours. finish is ultra clear and is u.v protected.

CPa tell me that as long as the FET is paid from producer of the baits the IRS are happy. This is reinforced by the years-long practice of this large manufacturer who provides me a quarterly statement of FET paid on our baits. He says the mold ownership is a whole direct set of circumstances and essentially moot for us because they can’t be used except on/in their proprietary system . He showed me a letter that is quite clear about who the IRS wants payment from . if we fire them we will need to have new mold built

11 x 8 Is my build plate..

Thank you! Yes the answer was clamp pressure. When I claim real tight I turn out slightly thinner bodies (Which I like). So I will just continue to clamp tight.

It doesn't show too much, but there is a thin line of chartreuse along the entire length of the bottom. And there is just a touch of Flo sunburst on the belly/throat. I could certainly do one with a holo finish. That would look AWESOME! Picture to come soon. Always up for a challenge. Could even do a ghost holo.

Fishingskirts being out of stock does get very frustrating. Allen