Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 06/28/2018 in all areas

  1. Well you got the chrome look!!!!! Would love to read your tutorial and understand what materials you're using and the pro's / con's of your method. Nice work!! J.
    1 point
  2. You have just asked a question that starts a lot of conversation. Summary yes you will need salt or other replacement to function in the role. Salt size is important and guys are all over the place in what is needed and why. Fine stays suspended better but clouds the bait for a few reasons. Ideally should be dry before use (salt naturally picks up water) and fewer additives the better (anti caking agents for example) . Ideally salt that is crystallized in small granules would be the best option but.... Do a search and you will find a lot of information on brands and sources but a "popcorn salt" overall good choice to begin with. Plastic temp also can help as cooler plastic and help keep salt suspended longer (especially if larger grained". Flake salts are a better choice but more costly and frequently you aren't getting what you paid for at one time only one location in US making it from what I recall. Some use round glass bead blasting media in lue of salt. More "true" colors and a more resilient bait. Ebay easy source or can buy a the HD additive from Do it that works similar but more expensive. Personally I would go with glass beads from ebay (size 10 MIL / 100-170 grit).
    1 point
  3. One thing I do with most of my blue gill's is heavily coat the top side with purple glitter. I like sparkle...
    1 point
  4. SR9, excellent question. Normally I would make the answer to this question overly complex, so this time I will not mention vortices (darn, I just did!). So, as long as you just accept that the lip creates side forces, that will suffice. The width of the lip controls the speed of the action or side to side motion. The wider the lip, the slower the speed. The forces on the lip also cause roll. The wider the lip, the more roll is generated. There comes a point when the roll becomes too much and the bait will spiral or swim on its side and become unstable. The length of the lip determines the power of the forces. These forces are balanced by the water forces on the body of the lure. A good analogy is a see-saw, were the balance point is the tow eye. On one side you have the lip forces, the other the body forces. If the lip forces are too strong, then the lip is pushed down. It will reach a point were it gets too far down and it will break out to the side and spiral. This is why on deep diving lips, the tow eye is usually on the lip itself, so that part of the lip force is above the eye, helping to balance with the body. Fine adjustment of this position will get you the maximum depth. As for the various shapes and patterns of lips, I can
    1 point
×
×
  • Create New...
Top