Lurehead03
-
Posts
239 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by Lurehead03
-
That Ukranian mold company mold material (Baitmold.com)
Lurehead03 replied to aulrich's topic in Soft Plastics
It's called Corian -
Corian Nat brave enough to try aluminum yet I've cut Aluminum but it's wasn't pretty it' a just a chineese cnc router with a geko 540 and upgraded steppers
-
always drill line up pin holes last went with .002 on ribs .004 on others but i'm going to surface .001 off as last pass made the gate bigger so in about 12hr.s we'll see if it works
-
This is what I've come up with whats the verdict
-
Thanks for comments I've used .003 but seems to let to much flash in Think i'll take one bait away so I can vent each rib and make sprue bigger and try that
-
What is a good depth for vents in a CNC mold so that there is not much flash? Sugestions on venting this
-
$" crawfish I designed caught alot of fish on it -
I have 2 used Del's 5.25 stick molds For Sale $55+ $6shp USPS/priority or $100tyd for both They have been modified for injecting
-
sorry for your quag i was going to order some from them but think i will wait and see if you get satisfaction
-
what tater said !!!! go to hobby lobby with the 40% off cupon
-
here is one i made used a crappie float and sand paper
-
i use the 5min HL epoxy for bills and line ties,hook hanger etc. i use devcon 2t 30min (from hobby club) for top coat most of the time it will 75/25 devcon and etex makes it brush on smoother and releases bubbles better than devcon by it self just be sure to mix the sh@#t out of it
-
is this what you are looking for http://www.normanlures.com/products/view/6/52
-
here you go
-
that what i did now i have 2 harbour freight abs 1 master and 2 paasche vls in a drawer and never use
-
I'd watch Hobby Lobby adds and when they run the 40% off coupon i'd go get the 159.00 iwata kit for 95 +tax and never look back
-
mike you still selling spues?
-
hell call it la mamba de negro and him to hug a root
-
What benton B said !!!! only diff is i coat whith CA twice sanding between coats
-
Ok I bought two 2cup sizes of these and thought Wow this would be great for putting into a presto pot surrounding with DWP and use for two color injecting. Boy was i wrong just a hint the insulating properties go both ways never got my plastic above 200' and I had the pot smoking. But all is not lost they are great for the micro
-
best luck i've had with that color is lure craft sweet potato .015 green .062 green .035 blk .062 blk to taste
-
jim i have some #6,#4s id sell have to count see how many maybe 50 of ea.
-
Look here for bulk hooks My link
-
I put my on with a cheap hobby brush best sealing idea yet!!!
-
G-loomis Gl3 Vs. St. Croix Sciii
Lurehead03 replied to leeshelton's topic in Rod & Reel building & repair
It's like this you get what you pay for if you can afford gl imx much better choice than gl3 if you can't save up!!!
