-
Posts
239 -
Joined
-
Last visited
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Posts posted by Lurehead03
-
-
Corian Nat brave enough to try aluminum yet
I've cut Aluminum but it's wasn't pretty
it' a just a chineese cnc router
with a geko 540 and upgraded steppers
-
always drill line up pin holes last
went with .002 on ribs .004 on others but i'm going to surface .001 off as last pass
made the gate bigger so in about 12hr.s we'll see if it works
-
-
Thanks for comments I've used .003 but seems to let to much flash in
Think i'll take one bait away so I can vent each rib
and make sprue bigger and try that
-
-
sorry for your quag i was going to order some from them but think i will wait and see if you get satisfaction
-
what tater said !!!!
go to hobby lobby with the 40% off cupon
-
here is one i made used a crappie float and sand paper
-
i use the 5min HL epoxy for bills and line ties,hook hanger etc. i use devcon 2t 30min (from hobby club) for top coat most of the time it will 75/25 devcon and etex makes it brush on smoother and releases bubbles better than devcon by it self just be sure to mix the sh@#t out of it
-
is this what you are looking for
-
-
I'd watch Hobby Lobby adds and when they run the 40% off coupon i'd go get the 159.00 iwata kit for 95 +tax and never look back
that what i did now i have 2 harbour freight abs 1 master and 2 paasche vls in a drawer and never use
-
I'd watch Hobby Lobby adds and when they run the 40% off coupon i'd go get the 159.00 iwata kit for 95 +tax and never look back
-
mike you still selling spues?
-
Can't he just renew the trademarks? I think you could even pick them up. If they were not expired, I think it would be a clear cut case.
I wouldn't jump to say he is trying to bully you or squeeze money out of you. He has built a bait business around the name, and probably feels you are impeding on him. Given the website, I'd say he is another small time guy trying to make a go of it. Even though he let the name expire, he spent some good money to register it in the 1st place. He probably saw or one of his customers saw and contacted him on that recent article on your baits.
Also consider, if your baits took off significantly from that recent article, without you owning the trademark, someone else can start using it and just confuse your customer base and future customers.
PS: Given he is small shop, probably checks in here once in a while, and all your cards are showing.
hell call it la mamba de negro and him to hug a root
-
What benton B said !!!! only diff is i coat whith CA twice sanding between coats
I sand my baits with 120 grit, seal with CA glue and a coat of epoxy. Once in awhile I have to sand the baits following the CA glue but not very often. I like flex coat's rod builder's epoxy because it's thinner than D2T to start. -
Ok I bought two 2cup sizes of these and thought Wow this would be great for putting into a presto pot surrounding with DWP and use for two color injecting.
Boy was i wrong just a hint the insulating properties go both ways never got my plastic above 200' and I had the pot smoking.
But all is not lost they are great for the micro
-
I am away from the shop til tomorrow and itching to get on this color.
Any advance ideas?
Looks tomato-ee according to the picture on Bass Pro shops under Tender Tubes...
Jim
best luck i've had with that color is lure craft sweet potato .015 green .062 green .035 blk .062 blk to taste
-
I like the VMC Barbarian Hooks
jim i have some #6,#4s id sell have to count see how many maybe 50 of ea.
-
Look here for bulk hooks
-
I put my on with a cheap hobby brush best sealing idea yet!!!
-
It's like this you get what you pay for if you can afford gl imx much better choice than gl3 if you can't save up!!!
-
i've been using Chemionics it's great just that somebody on here said 3g was way cheaper guess i been using 3g and didn't know it
-
does anyone know where you buy this?
That Ukranian mold company mold material (Baitmold.com)
in Soft Plastics
Posted
It's called Corian