Jump to content

woodieb8

TU Member
  • Posts

    1,221
  • Joined

  • Last visited

  • Days Won

    27

Everything posted by woodieb8

  1. we use 5 minute epoxy on lexan bills. remember scuff the bill to get best adhesion.
  2. any blade sprayed with candy paint or see thru paint on plated blades will definatly peel/flake. every spoon/blade manufacturer realizes the curse..they look pretty but don't hold up.plating seals the pourous holes in blades/spoons. theres nothing to bite onto. .
  3. hi you will need a 10 ton press..might be cheaper to buy the lips,unless its a custom shape.. we bandsaw lips weekly.
  4. should be intresting project.
  5. when we sprayed walleye/salmon spoons we used component system glitters. sprayed awesome with automotive clear coats..2nd coat covered it was superb.
  6. we use paashe nu.5 tip.. the glitter from dollar tree. it comes in small cellophane packets. sprays sweet. just remember a ball bearing in bottle to keep it suspended..oh ya the glitter comes in a large variety and its 1.25... some use a worn number 5 tip and sand the opening larger works well also. old school.
  7. that's pretty slick, no pun intended. I go thru hundreds of cups monthly. ..thanks again.
  8. on plastic baits we mix glitter in clearcoat. spray at 40lbs. shake bottle with ball bearings to keep suspended when spraying the clearcoat.. a fast 2nd coat covers all and its controlled.
  9. it all depends on what you sealed with? and yes as,Chuck youg stated a scuff for primer bite. we use solvent based primer.it meshes with the sealcoat.
  10. a hard but healthy road...congratz.
  11. large cranks. eagle claw or vmc.. saw some shoddy mustads last few years.
  12. enamels are tuffer then water base. we use some. cleanup requires solvents. if you use fast dry enamels there ok..always remember .you can use enamel over lacquers but not lacquers over enamels.
  13. rustolem 4x glo. 2 coats and etex . works well.
  14. we actually use ball bearings on pearls, metallic. I use baby food jars for spraying.
  15. anysize. as long as they fit and shake. even screws/bolts lol.
  16. woodieb8

    walleye

    lol we have many pictures. im old school. lots of guys don't want them shown public..i am too busy now.
  17. woodieb8

    walleye

    base yellow. top half dark brown. gold scale over body. white tail . that's how we do them.
  18. welcome back . in 1 month your new shop wont be that clean lol...all in fun.
  19. we use compresser oil from canadien tire. never had any issues. my big compreeser is actually a craftsman.,
  20. we use a oil compresser,not diaphragm. they last years. change oil yearly. never have any oil mist in my air supply.
  21. try luremaking.com. your in Canada.

    1. ddl

      ddl

      they are the worst of all for price

    2. woodieb8

      woodieb8

      how many you need?

       

  22. vacuum plated is best. but you would need numbers of blanks.
×
×
  • Create New...
Top