Jump to content

GARYS LURES

TU Member
  • Posts

    22
  • Joined

  • Last visited

GARYS LURES's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. for you that spray your baits with cans.did you ever have a problem with the paint staying soft.i used both lacquer and enamel on my last bait.then a clear coat.but after 3 weeks i can still Peel the paint off with my nail.all 3 paints i used are plasti kote automotive paint.what would you recommend.thanks.
  2. i ran out of line and hook eyes.so i picked up a pack at lows.the same size and shape of my jann's eyes.i was trying to screw them into a hard wood bait and had 2 break.the second time i even drilled a 1/32nd hole and it still broke just before i had it all the way in.I'm sure they are a lower grade.but did any of you ever have problems using these? :
  3. did you ever use this on a hard baits?its a primer sealer.shellac base sealer.a have a spray can but never used it yet.any info on this or another primer you like.
  4. do you like kills primer.i have a spray can of zinsser b-i-n.but never used it yet.
  5. i just picked up a spray can of zinsser b i n primer sealer.i dont have high hopes for it.but will give it a try soon.
  6. well i just try'd the dev con 5 minute.what is the secret to cleaning out the needals.it only comes with 2.i try'd flushing it with water but i think i waited to long.will it work if you don't use the needal?just squirt a few drops on a piece of wood and mix it by hand.at the rate i use it i will need 50 nozzles to use up the hole thing :
  7. GARYS LURES

    dev con

    i have read that devcon makes a good top coat.i never tryd it.did any of you?what do you think about using it as an adhesive for screw in line and hook eyes?
  8. thanks bob.what kind of epoxy do you like.i was thinking of wood glue or maybe dev con.
  9. for musky lures or other big lures.do you like to use any kind of epoxy for the screw in hook and line eyes.or do you think no epoxy will hold a big fish?
  10. i will try that.thats a very nice dragon fly you have.
  11. thanks riverman.i will practice doing that.i never did like the straight lines when using tape.hopefully some day soon i will get a spray gun.
  12. i don't use a gun just cans and brush for the details.how do you remove tape lines when you paint multiple colorers like say white on bottom black on top and some other color in the middle.i wet sand them with 800 grit but it still messes up the colors.is there a better way.or am i doing something wrong.thanks.
  13. I'm not sure if this is the correct area to post this.but i was thinking of using feathers from the local fly shop to make fins on my wood bait.but i dont know how to do it or attach it to the lure.any ideas.thanks guys.
  14. how can you do that without a spray gun?
  15. thanks for the info bob.i had no clue as to what adhesive to use.
×
×
  • Create New...
Top