Jump to content

Roger Linnell

TU Member
 View Profile  See their activity

  • Posts

    160

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Roger Linnell

  1. Roger Linnell
    tru dat
  2. Roger Linnell
    That's a Senko, so lotsa salt
  3. Roger Linnell
    I have some Yammy daiquiri and I think I made one feeble attempt at copying the color, epic failure. I think it has some color, maybe from pearls
  4. Roger Linnell
    I've used rtv to copy aluminum molds and made Ultra Cal molds from the rtv molds
  5. Roger Linnell
    These are from my plaster injection molds I made from original baits, 5' Kalin and 4' Yamamoto
  6. Roger Linnell
    It measures 3" in the mold, same as a Yammy 5," Kalin makes a 3" and a 5", Kalin 5 measures 3 1/4"
  7. Roger Linnell
    show off
  8. Roger Linnell
    What plastic are you using?
  9. Roger Linnell
    I made one from a jerky shooter, just takes a little engineering,
  10. Roger Linnell
    I've heard of using an electric can opener motor, never tried it
  11. Roger Linnell
    Elmers and water last forever too and it's much easier to deal with than epoxy, I just add in a little food coloring so I can see what's been coated
  12. Roger Linnell
    I would definitely try warming the mold first, always try the easiest cure first
  13. Roger Linnell
    the ones done right are bullet proof.
  14. Roger Linnell
    Hi-temp engine paint
  15. Roger Linnell
    I made my own molds, the one on top is the 5" Kalin, they come out alright. I had to search through my collection of originals to find enuf factory grubs that weren't dented to make the mold
  16. Roger Linnell
    Is the grub identical to a Kalin?
  17. Roger Linnell
    https://www.lurecraft.com/4-Y-Single-Tail-Grub-4-Cav-Injected-2-Pc-Alum/productinfo/5XLU-17170/ Lurecraft looks identical to yammy
  18. Roger Linnell
    MF original floats really well all by itself
  19. Roger Linnell
    Too easy
  20. Roger Linnell
    Lurecraft mold looks like GYB
  21. Roger Linnell
    I used to use epoxy, 50/50 Elmers and water is just easier to deal with in my opinion, high temp engine paint works too
  22. Roger Linnell
    those will catch fish, nice job
  23. Roger Linnell
    They aren't spun, just injected
  24. Roger Linnell
    Use hi temp engine paint for mold release between halves
  25. Roger Linnell
    you don't need mold release
×
×
  • Create New...
Top