Jump to content

maximusgunn

TU Member
  • Posts

    135
  • Joined

  • Last visited

Everything posted by maximusgunn

  1. Thanks Hughesy that was perfect much appreciated. Hevi, thanks for the offer not sure I want to sell them, but if I change my mind you will be the first one i message.
  2. Hey all been gone for a few years and starting to get back into the swing of things. I was going through some of my baits that have been in storage for a few years and came across a couple of crankbaits that I am having trouble finding info on, so any info would be appreciated. The one thing I really want to know is how deep they dive. They are specialty tackle Junior d's Thanks for any input
  3. kmolds.com makes a perfect replica of the shad shape his is called the mole worm
  4. Custom aluminum mold maker out of Ohio.
  5. Not sure if this is what your looking for if not they can make it pretty quick. http://www.kmolds.com/index.cfm?carttoken=0AU176E050810124438&action=ViewDetails&ItemID=23&Category=1941
  6. Try kmolds.com he can custom make you one with very little lead time maybe a couple weeks that would be for the programming and everything, email on his site he will get back to you the next day.
  7. you can try kmolds.com I have a few molds from them very nice indeed.
  8. Did you click on the link in my post "morning Dawn?" If you click on the link it has a recipe.
  9. Not sure if this is what your looking for. http://www.tackleunderground.com/forum/soft-plastics/12903-morning-dawn.html
  10. Strike king super quad hook
  11. Not sure if you could do one like the one you are talking about. I have an idea how to try it. It may take some time but if it works I will let you know, and post a picture.
  12. If you wanted a 3 color dip, kmolds could make the cavities and rods smaller then you could pull the tubes out with the rods left in and then dip them in your other colors. If you had a divided pyrex cup you could pour laminates, and swirls with the mold as well. I did some tequilla sunrise swirls for someone last week. I have 2- 8 rod dipping tools that I use when I dip, just gets to be a pain. Using the mold is so much easier. Wish I had a video recorder to show the process how fast and easy it really is.
  13. It would depend, like I said I have done both ways and to dip and get it the same thickness as a mold hand poured I would have to dip at least 2 times depending on salt content, so that is why I said pouring is faster. And T-man I am sure he would not say dipping is faster, if you read his post again he already said he could not say because he has never used a mold to make tubes, but I have done it both ways and pouring is faster. As fast as the pot will pour. When dipping you have to let the first dip set for a couple of seconds before the second coat, and by the time I do the second coat I have already poured my second tube and on to the third one. I am not sure how bojon does his but that is how I dipped mine, so that is why I say pouring is faster. It all depends on how thick you want your tubes with dipping, but with pouring they are perfect every time with the same consistency, now if you had a setup to where you could dip 10 tube rods at once then it would be as fast maybe faster. Too many variables to honestly say which is faster. Hope this answered some questions.
  14. I use the same cutter as bojon. I have no problems with this mold, it is not made like a tender tube type its more of a flipping tube if you keep the mold warm and the plastic hot you will have no problems. If you want a thinner walled tube kmolds can probably make a thicker rod. And bojon you can pour tubes fast with this mold in my opinion this is much faster than dipping I have done both. Also you can make a solid head with it for better hook holding properties. Hope this helped.
  15. Got my new tube mold from kmolds.com this thing pours really nice. Now I wish I had a pneumatic tail cutter.
  16. You can check with kmolds.com I believe he was working on a 4" slider style worm.
  17. Are you talking about the 4" Aluminum one from lurecraft? If you are I have it and really like it they swim pretty good and definitely catch fish. If you have any questions about it just let me know.
  18. I believe lurecraft might also.
  19. Lurecraft has a 2 piece aluminum swimbait mold that you can pour with a hook slot or without.
  20. Well I just got the MAAS in the mail today from Fish Devil and that stuffed worked miracles, it took the oxidation right off. I greatly appreciate that F.D. I will send that stuff back to you tomorrow. Thank you very much. Now that I think about it, it could have been a non-boater in the back of the boat spraying scent or sunscreen, whatever it was would not come off before but it is gone now. By the way fish devil did you get a chance to look at my site, I would like to send you something for letting me try that stuff. Just let me know Thanks again to everyone for the ideas.
  21. Thanks for all the help and advice I really appreciate it. The boat use to be stored in a heated garage, but I ended up moving and it was stored outside I had the sonar unit cover on it and it was under a boat cover as well. The oxidation is definitely on the outside not on the inside of the unit. I only did a small area with the goo gone and windex no damage done so far I hope. Thanks again Fish Devil you have 2 pm's
  22. Not sure where to post this. Would anyone know of a good way to clean a sonar screen its a LCX15 Lowrance. It has some sort of surface oxidation on it. I have tried windex, goo gone, soap, nothing seems to work. I believe it is lexan I just don't want to mess it up. thanks
  23. For some reason the lead will not stick to red hooks. What I do is use my dremel tool and wire brush to sand the red off the hook where the lead covers. That takes care of the issue. Hope this helps
  24. Anyone else notice lurecraft is selling aluminum molds now. Picture is not the greatest. They said they will be adding more as well.
×
×
  • Create New...
Top