Jump to content

curiousangler

TU Member
  • Posts

    9
  • Joined

  • Last visited

About curiousangler

  • Birthday 04/30/1978

Contact Methods

  • Website URL
    http://www.BigonesBaits.com

curiousangler's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. for the guys making molds out of bondo body filler, are you mixing it with the fiberglass resin bondo to make it pourable or what are you doing to make it pourable , if you are mixing what ratio are you using ? the filler comes with a hardner and the resin comes with a hardner do I mix these in each seperately then combine the 2 mixtures or mix resin and filler together then add on of the hardners or both someone help me out here?
  2. Hi, the shipping is 13. plus 75 for the mold. You can paypal 88 dollars to mmnabulsi@frontierwireless.ca

    Thanks,

    Mike

  3. I want one of the flappin molds just tell shipping to monroe va 24574 and where to paypal it to or where to send money
  4. are these the larger pots or smaller ones
  5. my local lowes , doesn't have pop in the big bags anywhere else sell it . here is a dumb question is joint compound and pop the same thing.
  6. I got the little blue bender and for some odd reason I lost the instructions, can somebody give me a step by step please .
  7. new at this kind of pouring, got a couple of molds but on the bullet bass jig mold I can not get the collar to fill in will either be none or half there what do I do?
  8. or I was thinking of using a machine like this Craftsman CompuCarve Compact Woodworking Machine to carve patterns in to the wood then cover them with rtv silicone to make molds out of them, so basically I would have a set of wooden masters, does that sound alright or would it not work?
  9. Craftsman CompuCarve Compact Woodworking Machine, if so what are your opinions on it good or bad .
×
×
  • Create New...
Top