Haulin'Bass

I was wondering if anyone knows were to buy bulk lead at? I buy mine from a tackle store here in town but, they only keep a small supply which is always out. I know they are getting it from somewhere but, the won't tell me because they want me to buy from them. Anyone got any suggestions? Thks, Jeff

Thanks for the help.

Does anyone know where to get those 3D eyes in various sizes in bulk. I have tried a few hobby shops with no luck and if you get them from the tackle stores they wind up being 35$ for 500(.07$/eye) which you only get 250 baits out of that. But when you need different sizes and colors it gets pretty pricey. Thanks

I make my own buzzbaits and for some reason I can't get them to run straight:angry: . It seems that I have had this problem with other buzzbaits that I have bought too(without a clanker blade). If I put a clanker blade on them they run straight but if it is just the blade then they all run to the left no matter the weight of the lure(1/4, 3/8, 1/2oz). Anyone got any suggestions? Thanks,

Thanks guys. You been a big help. Got some clear coat and and going to put glitter in it and try it out. Jeff

I will try that. Thanks,Jeff

Does anyone one know how to use glitter with powder paint. I tried to add glitter to my powder paint and dip my jigs but it never comes out right. Then I tried to sprinkle it on before the jig cooled and after I powder paint. Wondered if anyone knew of an easier way to add glitter and use with powder paint.

Can anyone that has a do-it ultra minnow head jig mold in the 1/8-5/8oz. 5 cavities mold send me an actual picture of the mold itself. Or can you tell me how much space is between the heads themselves. I have seen the ones in the bigger sizes and I know they are angled but I need the details on the the one with the 5 cavitites(1/8 oz-5/8oz). I am going to try to modify it for an idea that I have but I don't think there is going to be enough room between jigs in the mold to do the modification I want to do. I wanted to take a look at one before I bought it. Thanks

thanks

Ok I have tried to find buzzbait forms that are wider in width than the standard forms you buy in the .051" size from Barlows, or Stamina. I can't find them so I pretty much gave up. So I bought some wire and a Hagens wire bender which say that it does SB and BB. Well I can't get it to make the R bends. I know the little blue bender does it but does it have a conversion kit to do heavier guage wire? Does anyone know if they have one? Does anyone know if you can buy forms somewhere that aren't the standard 1 1/8" wide?