lajo1976

Someone else with experience with this unit?

Its called Bondcoat http://www.ispikeit.com/Store/p-691-bondcoat-glue-4849.aspx

Hi, I'm looking for round jig heads in 1 and 1 1/2 oz and hook size 5/0 or 6/0. Is there someone pouring this kind of jig heads. Shad style jig head is also interesting. Thanks.

Is there any difference in heating element and thermostat between them? I'm thinking of attach a steelplate under the aluminium pot on the deep fryer to have better and more uniform heating.

Sent you an IM and email Frank! Thanks! /Joakim

What's the difference in a Presto Pot and Deep fryer? I've seen Deep fryers with variable thermostat like a presto pot. I live in europe and Presto pots isn't availble here. I can buy one from US but the shipping charge is high and I have to convert 220 volt to 110 volt. Deep fryers is availble almost in every kitchen supplier. Is the heating element and thermostat better/diffrent on a Presto Pot? Thanks! /Joakim

I'm going to buy a Presto Pot for heating plastic. Looking at Prestos website there is two types of pots. One is the Kitche Kettle(1200 W) and the other is the Options(1300 W). Is there any difference in capacity between thos two? http://www.gopresto.com/products/products_search.php?search_value=10&operation=Search&search_type=category

I will try to slow down the heat process. Thanks

I have bought the Pourasol Medium and have major issue with micro bubbles when heating in micro. Does anyone have solution to geg rid of those? I've emailed Bruce at spikeit but haven't heard back from him about the problem.

Bruce McElroy colortech@bulloch.net I'm having the same problem with microbubbles with pourasol medium. I'll email them and notify them about the problem. I'll talked to them before ordering this plastisol and they were very helpful but haven't talked to them about the problem. /Joakim

I also saw them but gone now!! Nice baits.

Try loctite glue for plastic with an activator. Have glued plastic on metal and then machined the plastic without problem.

Do you know if this plastisol hard pack or not?

Thanks. I try upper hand scent menhaden oil. /Joakim

Hi, I´ve looked for some smelt scent but couldn´t find any. Searched at Del-mart, Lurecraft and Bear. Is there any manufacturer how has smelt scent? Thanks. /Joakim

Hi, I made an RTV mold from clay master. The mold has a smooth inside. But when I looked at the poured bait it has some small dents in the surface. I tried to use clear plastic at 350 F with no bubbles but still the same result. I also received a bait sample from Lurecraft and that bait has similar dents in the surface? Any suggestions to avoid dents. I also sprayed the mold with worm oil but still the same result. I´ve made some POP molds and the baits has no dents. I attach a picture from Lurecraft website to show the dents in the bait. Crappy picture but it shows the dents. /Joakim

PM sent on the two 5" original money minnow mold. /Joakim

Longhorn: How long does it take to heat plastic with heatlamps? Do you have to stir when heating and when your pouring? Think I will buy some heatlamp soon!

I can buy a small oven to a cheap price. I'm going to put it in the garage. It would be more even heating process compared to micro. I think the loss of heat when opening is small.

Has anyone heated plastic in a oven? How long does it take to heat compared to a micro. /Joakim

Will the LC colorant thin slicone caulk or are you talking about RTV silicone? I