Jump to content

Raw Worm

TU Member
  • Posts

    25
  • Joined

  • Last visited

About Raw Worm

  • Birthday 12/10/1974

Raw Worm's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Where do you find the teflon pins?
  2. Angling A.I is the one that makes the molds for lurecraft. I just bought a few of these molds and I love them. Josh has great customer sevice and he is very fast with the product. http://www.anglingai.com/category_s/44.htm
  3. Sorry to repost but I did get any resonse in the other section... I would like make my own "Rebarb" style hooks. I know that they made with shrink tubing that is cut at an angle but, is there a special type of shrink tubing or is it formed in a special way? Any tips will be great help thank you. Jamie ipb.global.registerReputation( 'rep_post_181283', { domLikeStripId: 'like_post_181283', app: 'forums', type: 'pid', typeid: '181283' }, parseInt('0') );
  4. I would like make my own "Rebarb" style hooks. I know that they made with shrink tubing that is cut at an angle but, is there a special type of shrink tubing or is it formed in a special way? Any tips will be great help thank you. Jamie
  5. Ok... I will give it a try on my next attempt. Is the a video that I can see? I lloed on youtube but all I could find was one that talks about tying with the wire and strips that already seperated. Thanks again for the help Jamie
  6. Today was my first attempt at hand tying bass jigs. I got the tying with the wire down pretty good but seperating the Living Rubber strips is got puzzled. I have read that I should stretch the strip and cut acrossed slowly. It works at seperating them into groups of 5 or 6 strands but not in single. I dont know if it matters but I have the fine grade matterial. Thanks for any help or comments Jamie
  7. Its been a long time since I have poured and as I exspected, my colorant and settled and hard packed in the bottom of the bottles. I tried to mix them with a stir stick but it is still hard packed. Is there an easier or simpler way to correct this issue? Will it help to store the colorant at a different temperature... warmer or cooler? As always thank you for your help and comments, Jamie
  8. I tried this link but it gives me an error... Telling me that that I don't have permission to view that post.
  9. I have been searching this forum for a poll or topic that asks "what is everyones favorite Plastisol?" I can only find a few topics that just covers one or the other brands. If you can point me in right direction that would be great or just let me start that topic again: What is your favorite Plastisol and why? Thank you for your help and comments, Jamie
  10. Is there anything I can use in a pinch, because I ran out of oil any and I have an order that I have to fill before my shipment gets in.
  11. I was thinking of making my worm oil but ,I am not sure what type of oil to use as a base. I was thinking that mineral oil would be a good start. Any suggestions would be greatly appreciated.
  12. I'm make a mixer for my presto pot. The question I have is, what is the best RPM for the motor? Any input would be greatly appreciated. Thank you, Jamie
  13. I have looked through TU for "How tie bass jigs videos" but I was unable to find one. I have also looked on youtube and a couple of other places with no luck. Has any one found a good web site that I can go to? I am just trying to get some basics. One of the things I am trying figure out is "how to seprate the round living rubber". I heard that all you have to do is pull it tight then cut slowly at the end. Any help would be appreciated Raw Worm
  14. Thanks for the ideas. That helps a lot!!!
×
×
  • Create New...
Top