navarre66

Hey Guys, I did not mean to start an argument I just wanted to buy a trick worm mold. Sorry I asked.

Hey Guys, I'm thinking of buying the 6" flat belly finesse worm from Bear Baits. How close is it to a trick worm? i have the 4.5' but I heard that the 6" was cut different. Can anyone tell me what the difference is? THNX NAV

Sims, Thanks for the #. just got off the phone with the owner. good lookin out.

Simsbaits, Thanks for your reply, Did you have a web address or phone # for git bit baits?

Hey guys, Does anyone know If get bit baits are still around, left a few Emails but no response. I had some 4" tubes from them that had skirt strands in them. I know I can do that to any tube myself but they had a color called leach that I wanted to duplicate. If anyone has a alternate email address or a phone #, I would greatly appriate it.

Hey Bassman, There are a few on some of the site but they do not have the the same action (IMHO), so I made one out of silicon, If you take your time ( it took me three tries),you can get the mold almost completely round. Mine is 6 cavities with a hook slot. Check out Longhorn's (Master Yoda,LOL) tutorial on making mold boxes for silicone, Sorry I can't show a pic because my camera on the fritz.

Bearbaits sells a 10.5" full round worm and a flat bottom worm. I use the 4.5" and 6" for dropshoting and the 8" for shakey heads (flat), Del also carries a 10" forked tail worm that is good also. try it with a punch skirt in the grass. It works wonders here on the Potomac river.

@Frank, I was wondering which baits caney creek does not work well with pouring I'am in the process of switching from lc to caney creek.

Hey guys, I was wondering if anyone made a spray paint for plastics. I going to make a mold for swimbaits and wanted to make them look real. Spike it makes a dye that can be sprayed but I think paint would work better. What do you guys think. Thx NAV

I think I have decided on the 709 and 3.75, Think I better buy both, just to be on the safe side. Hey does anyone know how to make a bait more opaque.

Hey Guys, I'm looking to buy a craw mold, I was looking at basstackles 709, 705, and the 3.75 craw. Which do you prefer.

Hey Frank, If you take a look at the first pic, the amber did seem to bleed over the green. I think that was the sluggishness I talked about earlier. used the worm oil and it seem to work better. Thanks for your help. Nav.

Okay let's try this again The green is the top color and the amber pepper is the bottom, I will be replacing the black flake with christmas tree and gold.

Hey Frank cant get the pics to upload will try later

Oops, Almost forgot, when using laminate is there a ratio for the colors, Some of my color seem to dominate the other (watermelon on top, amber brown on the bottom). The watermelon seems to be more pronounced than the amber. I will be using these colrs for my Camo. will place in the colorbook when it is spot on.. So should I make the the amber darker? or the watermelon lighter.