[Airbrushing Jigs]

What temp are you curing at? Tin melts at 450,I cure at 350 for 20 min.

[fluid bed problems]

I use the same vibrator it works excellent, I use two heavy duty elastics so I can move it to different fluid beds. 

[Inline spinner, blades won't spin]

I would make the shaft a wee bit longer at least 1/4 to 3/8 longer

 

[clip on blade rig]

Called hook snaps

[Shawn Collins Customs What A Pleasure To Deal With.]

Google would be a good start

[Mustad 32746BLN]

Luremaking.com carries them.

[Maybe A New Way To Put Eyes On Jigs]

You should try craft paint.I use one called Craftsmart premium satin acrylic paint got it at Michaels, it will take heat to 350 degrees, powder paint jig heads as usual then apply the eye with nail let dry then apply the pupil (different color) then put jigs in oven to bake I do mine 360 degrees for 20 min.The acrylic paint melts into the head and can't scratch off.

[Building a new jig mold, any tips on production painting patterns?]

I use a craft paint called craftsmart (michaels sells it)after powder painting my jigs I use craftsmart to put the 2 color eyes on.You can put it in the toaster oven 350 degrees for 20 min,it doesn't run and seems to melt into the powder paint you cant scratch it off.

 

[Eagle claw 635 black platinum hooks]

Luremaking.com in ontario carries them.

[Jig information]

On a blown up picture of the jigs looks like a regular jig hook,but it looks like  the hair is in the lead you cant see any thread.

[Foil or lure tape?]

They also carry nail foil.

 

[Foil or lure tape?]

Have you looked at Ali express "holographic heat foil"?

[Goofy jig]

[Another question about 210 danville]

Is there any place to buy bulk spools of 210 danville?

[Lee Bottom Pour Maintenance/cleaning]

When I clean out my pot, I take a drill bit same size as pour spout and ream it out there is a lot of rust that comes out,my pot hardly drips after. 

[Diy Fluid Bed Trouble Shooting!]

 oops

 

[Getting into jigs]

Google roto metals for prices. Also lead melts at 621 deg and bismuth at 520 deg.

[Saltwater & Powder Paint]

I wonder if it's salt water that causes it or is it dragging in the sand every once in a while causing it.I don't fish salt water,and my jigs looses its shine when bouncing off  a sandy bottom when fishing walleye.

[Harbor Freight Powder Paint]

I use the black but thin it with clear gloss,comes out really shinny.I aso have a vibrator on my fluid bed with the air.

[Brown bucktail hair]

I dye a lot of the leftover brown buctails to black.

[Eagle Claw hook source]

Luremaking.com  has them listed,but they are a Canadian co.

[Single row fluidbed]

cs coatings (component systems) has a fluid bed that will do up to 130 jigs (depending on size) at once.

[Tackle shops near Detroit]

By the time you add the exchange rate its about the same price.

 

[Tackle shops near Detroit]

Try Luremaking,com they are north west of Toronto. 

[Erie Rig Mold]

16 hours ago, Janie'sPassion said:

Nice find!!

You did notice the original post is 10 yrs old.